1 / 2
Coronavirus Pandemic Hygiene: Sanitizer Holder — zdjęcie 1
1 / 2

Coronavirus Pandemic Hygiene: Sanitizer Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Useful? Whimsical? This 3-D print is a belt clip to keep your sanitizer bottle handy.

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
379
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Useful? Whimsical? This 3-D print is a belt clip to keep your sanitizer bottle handy. The easy-to-print design demonstrates some handy techniques: a snap fastening of separately printed parts, and post-print thermoforming.

Print instructions

The Sanitizer Holder is assembled from two easily-printed parts.

  1. You can directly print the shallparts.gcode file. Prefer arranging and slicing yourself? Use shclip.stl and shgrip.stl, but be sure to rotate shclip so it prints flat on the bed. No supports are needed.

  2. The clip must be bent after printing, a simple process using a cup of boiling water, as demonstrated in this video:

  3. Snap the two parts together and it's ready!

  4. If you don't have a little bottle of sanitizer, use any travel size bottle (shampoo, etc) and replace the contents. You can heat and bend the bottle grip to match your bottle profile.

Tagi