1 / 1
MK3S+ print fan shroud (for Delta-P fan mod)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print fan shroud for MK3S+ with Delta-P fan mod
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 120
- Wydruki
- 6
- Wyświetlenia
- 806
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (1)Kolekcje (38)Powiązane
Simple hexagon shroud for your Delta-P fan modded MK3S+ 5015 part fan.
Had part fan crack slightly when tightening too much and screw head going in the fan hole, so I created should for the fan.
Fully support free.
Optimized dimensions for 0.2mm layer height @0.4mm nozzle.
Mine is PET-G, but PLA should be just fine.
Gcodes only for Mini but I included 3MF and STL.
Also check out the V2 remix Soulrider911 did