Raaw Madonna Improved Brake Cable Guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brake hose guide to run the brake line through the middle of the pivot for a Raaw Madonna V2. This is a way tidier…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 175
- Wydruki
- 1
- Wyświetlenia
- 1644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A brake hose guide to run the brake line through the middle of the pivot for a Raaw Madonna V2. This is a way tidier brake routing and eliminates the hose pulling through as the bike goes through its travel.
Designed for 6mm Goodridge brake hose. You may need to modify for other brake hose, or use heat shrink tubing to get the OD to snap into place.
Printed with NylonX. Pressure fit into the main pivot, so depending on your filament's shrink-rate you may need to adjust to keep it secure. Mine has been super secure.
I printed the main pivot guide vertically with supports for a nicer surface finish but less strength. YMMV.
Also included a chainstay guide, which uses standard zipties.
Print Settings
Printer:
Matterhackers Pulse XE
Rafts:
No
Supports:
Yes
Filament:
Matterhackers NylonX
Category: Sport & Outdoors