1 / 3

Roller Shade Fix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Soloo

@Soloo

My roller shade broke a few weeks ago. It's around six feet long and would be over one hundred dollars to replace. The…

Ocena: 0 / 5
Polubienia: 3
Pobrania: 11
Wydruki: 0
Wyświetlenia: 285
Oceny: 0

Aktualizacja u źródła: 14 wrz 2022

Informacje o modelu

Źródło: Printables
Kategoria: Other Ideas
Licencja: Creative Commons — Attribution — Share Alike

Szczegóły Pliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)

My roller shade broke a few weeks ago. It's around six feet long and would be over one hundred dollars to replace. The price was just to high. I decided to 3D model and print the part myself to save some money. Hopefully you can download the model and do the same. Below are the printer settings I used.

Printer: Type A Machines Series 1

Plastic: ABS no heated bed

Build Platform: Glass with sanded painters tape @ 23 degrees Celsius

Nozzle Temperature: 239 C

Nozzle Size: 0.5 mm

Slicer: Simplify 3D

Layer Height: 100 microns

Brim: 5 cm

FYI: When using ABS. Sand the tape a lot. If the print fails. Print again ASAP to maintain some heat on the build platform.

For more information go here http://helpme3dprint.com/blogs/news/13574710-3d-print-a-roller-shade-end-plug

The filament used in this print came from http://www.ORDSolutions.com

The amazing 3D printing software used in this print can be purchased at http://www.simplify3d.com

Please subscribe and comment!

Thanks,

Malcolm

Instructions