Easter island Moai - Sliced (Single & Dual colour versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sliced Moai head to test your printer accuracy. There are 2 models. One with 1.2mm (x3 extrusion width)…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a sliced Moai head to test your printer accuracy. There are 2 models. One with 1.2mm (x3 extrusion width) vanes and ones with 0.8mm (x2 extrusion width) vanes - assuming slicer set to 0.4mm (100%) nozzle width.
Each model has a 1, 2 or 3mm base to support the vanes so be very careful removing from the build plate. Do so at your own risk :)
Note: If you scale the size of the model then the vanes widths will change and may no longer be an exact multiple of a 0.4mm nozzle.
[Edit]: Multiple base thickness versions added
{Edit}: Added dual colour sliced version
Print Settings
Supports:
No
Notes:
A well-tuned printer should be able to print this without supports.
Category: 3D Printing