Easter island Moai - Sliced (Single & Dual colour versions)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a sliced Moai head to test your printer accuracy. There are 2 models. One with 1.2mm (x3 extrusion width)…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 302
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a sliced Moai head to test your printer accuracy. There are 2 models. One with 1.2mm (x3 extrusion width) vanes and ones with 0.8mm (x2 extrusion width) vanes - assuming slicer set to 0.4mm (100%) nozzle width.
Each model has a 1, 2 or 3mm base to support the vanes so be very careful removing from the build plate. Do so at your own risk :)
Note: If you scale the size of the model then the vanes widths will change and may no longer be an exact multiple of a 0.4mm nozzle.
[Edit]: Multiple base thickness versions added
{Edit}: Added dual colour sliced version
Print Settings
Supports:
No
Notes:
A well-tuned printer should be able to print this without supports.
Category: 3D Printing