runde Tablettendose Aufbewahrungsdose round Pillbox storagebox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Runde Dose, leicht mit einer Schichthöhe von 0,25mm zu drucken round box, which is easily printable with 0,25mm layer
- Ocena
- 4,571 / 5
- Polubienia
- 42
- Pobrania
- 902
- Wydruki
- 4
- Wyświetlenia
- 2549
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Allgemeines
70mm runde Aufbewahrungsdose, welche sich schnell und einfach mit 0,25mm Schichthöhe drucken lässt.
Eine Version mit einem Trennsteg und eine andere mit 2 Trennstegen im Inneren.
Optional kann z.B. eine Beschriftung angebracht werden.
Da die Konstruktion in Fusion360 nicht optimal ist, teile ich die .f3d Datei nur auf Nachfrage.
Druckeinstellungen
- Drucker: Prusa MK3s
- Schichthöhe: 0,25mm
- Infill: 15-20% Bienenwabe
- Vertikale Perimeter: 3
- Decke- & Boden Schichten: 3
- skalierbar: nicht getestet
Material
- bisher nur aus PLA
- auf den Bilder: ERYONE PLA+ Blau
General
Round storagebox with 70mm diametre, which is easily and fast printable with 0,25mm layerheight.
One version with one separation and another with two separations inside.
For example you can add some labeling.
In this chase, the construction in Fusion360 isnt the best. When you want to get the .f3d data, then contact me please.
Print Settings
- Printer: Prusa MK3s
- Layerheight: 0,25mm
- Infill: 15-20% honeycomb
- Vertical Perimeter: 3
- Top- & Bottomlayer: 3
- scalable: not tested
Material
- since printed with PLA
- on the picture: ERYONE PLA+ blue