1 / 4
runde Tablettendose Aufbewahrungsdose round Pillbox storagebox — image 1
1 / 4

runde Tablettendose Aufbewahrungsdose round Pillbox storagebox

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Runde Dose, leicht mit einer Schichthöhe von 0,25mm zu drucken round box, which is easily printable with 0,25mm layer

Rating
4.571 / 5
Likes
42
Downloads
902
Makes
4
Views
2,549
Reviews
7

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Share Alike

Allgemeines

70mm runde Aufbewahrungsdose, welche sich schnell und einfach mit 0,25mm Schichthöhe drucken lässt.

Eine Version mit einem Trennsteg und eine andere mit 2 Trennstegen im Inneren.

Optional kann z.B. eine Beschriftung angebracht werden.

Da die Konstruktion in Fusion360 nicht optimal ist, teile ich die .f3d Datei nur auf Nachfrage.

Druckeinstellungen

  • Drucker: Prusa MK3s
  • Schichthöhe: 0,25mm
  • Infill: 15-20% Bienenwabe
  • Vertikale Perimeter: 3
  • Decke- & Boden Schichten: 3
  • skalierbar: nicht getestet

Material

  • bisher nur aus PLA
  • auf den Bilder: ERYONE PLA+ Blau

General

Round storagebox with 70mm diametre, which is easily and fast printable with 0,25mm layerheight.

One version with one separation and another with two separations inside.

For example you can add some labeling. 

In this chase, the construction in Fusion360 isnt the best. When you want to get the .f3d data, then contact me please.

Print Settings

  • Printer: Prusa MK3s
  • Layerheight: 0,25mm 
  • Infill: 15-20% honeycomb
  • Vertical Perimeter: 3
  • Top- & Bottomlayer: 3
  • scalable: not tested

Material 

  • since printed with PLA
  • on the picture: ERYONE PLA+ blue

Tags