Ratchet strap corner protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your straps from damage when securing objects with sharp edges. 25mm (1") and 40mm (1.5") wide straps
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 297
- Wydruki
- 1
- Wyświetlenia
- 1281
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I print these in PETG with 0.8mm nozzle and 3 walls but 0.4 with 5 or 6 walls would be plenty strong enough. Maybe 20% fill. It's functional so I use thick layers.
Prints on its side without support (orientation as per photo).
There's a 25mm and 40mm version but you could scale it for different strap widths. The bar at the back stops it falling off the strap. You could cut a slot in the bar so you don't have to thread the strap through (I didn't design it that way because it's easier to print without).