Ratchet strap corner protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protect your straps from damage when securing objects with sharp edges. 25mm (1") and 40mm (1.5") wide straps
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 297
- Makes
- 1
- Views
- 1,281
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I print these in PETG with 0.8mm nozzle and 3 walls but 0.4 with 5 or 6 walls would be plenty strong enough. Maybe 20% fill. It's functional so I use thick layers.
Prints on its side without support (orientation as per photo).
There's a 25mm and 40mm version but you could scale it for different strap widths. The bar at the back stops it falling off the strap. You could cut a slot in the bar so you don't have to thread the strap through (I didn't design it that way because it's easier to print without).