Growler Cap and Pour Spout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fairly simple cap, with dimples to help tighten/loosen. Also, for those folks who need it, a cap/pour spout…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fairly simple cap, with dimples to help tighten/loosen.
Also, for those folks who need it, a cap/pour spout combination. The reason I made it is that I flavor drinks with fruits, and didn't want the fruits coming out during a pour. With the filter, it keeps the larger fruits in as well as giving the drink a chance to get a nice pour without getting all splashy and stuff. :-)
To print the pour spout, you'll need to print it "spout up" of course. I used some very small supports just to get the cross beams. The straight cap itself is easily printed flat side down.
I printed PLA with 1.2mm walls/top/bottom and they are plenty sturdy.
Note: for these to fit well, I printed them at 104% on my printer. Your mileage may vary depending on how accurate your printer prints. I'd be willing to bet that you will need to print them a bit larger than "as designed".
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
0%
Filament: Zyltech PLA Black
Category: Kitchen & Dining