Growler Cap and Pour Spout
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fairly simple cap, with dimples to help tighten/loosen. Also, for those folks who need it, a cap/pour spout…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 65
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fairly simple cap, with dimples to help tighten/loosen.
Also, for those folks who need it, a cap/pour spout combination. The reason I made it is that I flavor drinks with fruits, and didn't want the fruits coming out during a pour. With the filter, it keeps the larger fruits in as well as giving the drink a chance to get a nice pour without getting all splashy and stuff. :-)
To print the pour spout, you'll need to print it "spout up" of course. I used some very small supports just to get the cross beams. The straight cap itself is easily printed flat side down.
I printed PLA with 1.2mm walls/top/bottom and they are plenty sturdy.
Note: for these to fit well, I printed them at 104% on my printer. Your mileage may vary depending on how accurate your printer prints. I'd be willing to bet that you will need to print them a bit larger than "as designed".
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
0%
Filament: Zyltech PLA Black
Category: Kitchen & Dining