1 / 1
ESK8 wall hanger- fits 6 inch (~150mm) pnummies — zdjęcie 1

ESK8 wall hanger- fits 6 inch (~150mm) pnummies

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To hang your esk8 on the wall. Fits 6 inch China pnummies perfect. Uses two screws to mount.

Ocena
0 / 5
Polubienia
4
Pobrania
15
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hang your electric skateboard!

Wanted to hang my esk8 up to clear some space on the ground, so i quickly designed these! They mount using up to a M5 (5mm) bolt, and have a 15mm clearance so a washer can be added (or you can use a phat screwdriver idk). 

I've included the .STEP so anyone can modify

 

Printing Advice:


I recommend a high wall count, and if you can use a large nozzle it will speed up the print and make it stronger!

Definitely PRINT IT FLAT. I've included a photo of print orientation. 

I printed mine in PLA, and so far, they're holding up no problem (my board weighs around 15KG)

Post your makes!

Tagi