1 / 4
8mm tslot  30x30 aluminium extrusion slot in standoff with 3mm hole — zdjęcie 1
1 / 4

8mm tslot 30x30 aluminium extrusion slot in standoff with 3mm hole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Standoff for 8mm grove in 30x30 aluminium extrusion. It slides right in lightly with a bit of clearance. Has a 3mm hole.

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I was building some stuff using 30x30 aluminium profile extrusions and wanted to place an LCD for Arduino on top of it. Created two versions of these slide in standofs. It didn't need any rigidity of bear any loads so it ligtly fits and slides in. 

Properties:

  • 8mm tslot groove
  • 29mm height (vertical)
  • 40mm height (angled)
  • 3mm hole non threaded

 

Mine are printed in Prografen Graphene PLA. Very rigid, stiff and dimensionally stable PLA. 

 

Print settings:

  • Nozzle temp: 220 (215 1'st layer)
  • Bed temp: 60c
  • Speed: 150mm/s for everything

 

Tagi