1 / 4
8mm tslot 30x30 aluminium extrusion slot in standoff with 3mm hole
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standoff for 8mm grove in 30x30 aluminium extrusion. It slides right in lightly with a bit of clearance. Has a 3mm hole.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I was building some stuff using 30x30 aluminium profile extrusions and wanted to place an LCD for Arduino on top of it. Created two versions of these slide in standofs. It didn't need any rigidity of bear any loads so it ligtly fits and slides in.
Properties:
- 8mm tslot groove
- 29mm height (vertical)
- 40mm height (angled)
- 3mm hole non threaded
Mine are printed in Prografen Graphene PLA. Very rigid, stiff and dimensionally stable PLA.
Print settings:
- Nozzle temp: 220 (215 1'st layer)
- Bed temp: 60c
- Speed: 150mm/s for everything