Ender 3 (V2) motherboard case for Ender 3S1 motherboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to equip my Ender 3v2 with a motherboard from the Ender 3S1, and with a Sprite Extruder.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to equip my Ender 3v2 with a motherboard from the Ender 3S1, and with a Sprite Extruder. That's why I created a case for the new motherboard with USB-C and a standard SD card. M3 brass inserts must be melted into the case. I also created a facelift for the drawer and the entire front. The upper and lower collar of the drawer must be sanded so that the facelift can be glued to the front of the drawer. The front facelift can also be used in combination with the original motherboard case for ender 3v2. The lower cover is adapted for a 60x60mm fan. Some taller legs are needed for the box to fit in place.