Manga Screen 2 Large Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display enclosure for the Manga Screen 2 (5.9" Large Version). Designed to be as slim as possible and provide cut-outs…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Display enclosure for the Manga Screen 2 (5.9" Large Version). Designed to be as slim as possible and provide cut-outs for 50 x 50 mm VESA mounting built into the back of the display controller mounting.
Bezel and back should snap together (0.4mm clearance on sides for the display). Bezel tabs are fragile and can easily be broken off.
Print bezel file at 100% infill without supports at 100 micron layer height. Back can be printed at 50% infil, 200 micron layer height with supports (a gap of 300 micron so supports can be easily removed.
The VESA arm mount from https://www.thingiverse.com/thing:2799628 to attach to the top of the printer frame with 2x M3 screws and t-nuts. I have added mounting holes for M5 screws and t-nuts (File Mount_Frame_2020_hole.stl)
Print Settings
Printer:
Prusa Wilson
Rafts:
No
Supports:
Yes
Resolution:
100 micron / 200 micron
Infill:
100% for bezel and 50% for back
Notes:
Optionally can use two case brace assemblies. Requires 4 M2.5 x 5mm screws for the sides and 4 M3 x 4mm screws for the back. There should be space to affix very thin material to protect the lcd display and connector cable on the back. Adequate space should be available for connecting micro USB and HDMI cable to the bottom of the Manga Screen 2.
Print bezel file at 100% infill without supports at 100 micron layer height. Back can be printed at 50% infil, 200 micron layer height with supports (a gap of 300 micron so supports can be easily removed.How I Designed This
Designed in Autodesk Inventor based on available STEP file
Category: 3D Printer Accessories