Face Shield Visor using A4 transparent sheet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As you may already know due to the covid_19 medical supplies are running out quickly and people who are at the front…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
As you may already know due to the covid_19 medical supplies are running out quickly and people who are at the front lines are struggling to keep themselves safe.
To try and help I have designed a quick and easy design of a face shield visor that can be printed in less than an hour and uses A4 PVC covers. The frame is printed using Fillamentum CPE using a 0.6 nozzle at 0.3 mm layer height.
The PVC covers are 250u and I used a hole-punch to create the holes. So no laser or cutting equipment is needed. Holes are punched with a standard hole puncher (80 mm distance between holes) on the starting edge of the A6 setting.
I hope you find this useful and I pray to God we get through this with ease! Stay safe everyone! #togetherwecan
If you are able to print it and test I would love to hear back from you!
*Please note these are not medically approved nor tested yet. I am sending to a few doctors next week to try them out.
Print instructions
Printed using a 0.6 mm nozzle.
Layer height: 0.3 mm.
Infill: 30%
Printing Speed 65 mm/s
Perimeters: 3
No support, No Raft.