Face Shield Visor using A4 transparent sheet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As you may already know due to the covid_19 medical supplies are running out quickly and people who are at the front…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 69
- Makes
- 0
- Views
- 1,289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
As you may already know due to the covid_19 medical supplies are running out quickly and people who are at the front lines are struggling to keep themselves safe.
To try and help I have designed a quick and easy design of a face shield visor that can be printed in less than an hour and uses A4 PVC covers. The frame is printed using Fillamentum CPE using a 0.6 nozzle at 0.3 mm layer height.
The PVC covers are 250u and I used a hole-punch to create the holes. So no laser or cutting equipment is needed. Holes are punched with a standard hole puncher (80 mm distance between holes) on the starting edge of the A6 setting.
I hope you find this useful and I pray to God we get through this with ease! Stay safe everyone! #togetherwecan
If you are able to print it and test I would love to hear back from you!
*Please note these are not medically approved nor tested yet. I am sending to a few doctors next week to try them out.
Print instructions
Printed using a 0.6 mm nozzle.
Layer height: 0.3 mm.
Infill: 30%
Printing Speed 65 mm/s
Perimeters: 3
No support, No Raft.