Suzuki Jimny Ash Tray Mount - JB43
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plastic version of the ashtray mount in my 2010 Suzuki Jimny, with cleats for mounting your choice of accessories.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 1357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Don't smoke, or need to keep random jingly coins in your 1998-2018 Jimny? Replace it with something useful!
This simple mount replaces the stock ashtray mount, and includes two angled cleats for attaching your choice of accessories in the slot.
Examples of potential accessories include:
Oricom UHF310 Radio: <link tbd>
Printing instructions: I printed in PLA, used supports and printed standing vertical on it's side. This means the layer lines are not up/down or back/forward which are the most likely stress directions.
Note: accessories should be <100mm wide if they're >50mm deep because of the plastic walls.