USB charger mount - Yamaha XT660
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This USB charger mount is made to fit under the seat of a Yamaha XT660X/R motorbike.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This USB charger mount is made for those Yamaha XT660X/R drivers that wants to charge there USB device while having it in the storage compartment under the seat. It is made to be used with a USB charger from "Pro-Car", but will probably fit with most others.
Feel free to post you prints!
Print Settings
Place horizontally on bed and use support material for overhangs. PLA plastic works fine and that's what I used.
Post-Printing
Assembly and connection:
Made to be fixed with the original screw for the inner liner of the rear wheelhouse. The ground cable can be connected directly to the minus terminal of the battery. While the plus cable should be connected after the Ignition fuse, since the charger have a continuous drain of ~5mA.
How I Designed This
Design aspects:
This mount is my original drawing. The design is made to be strong and printer friendly, but does demand the use of support material.
CAD files:
I also posted the Rhino .3dm file which allows you to modify this mount to fit other applications.