Nr.3 Scalpel Case with Spare Blade Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage case for Scalpel knifes that holds spare blades.
- Ocena
- 4,667 / 5
- Polubienia
- 53
- Pobrania
- 171
- Wydruki
- 4
- Wyświetlenia
- 926
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is yet another storage case for a Scalpel knife, but this one incorporates a compartment for storing up to three spare blades and has a sliding door mechanism. The case is make specifically for my Gima branded Scalpel handle Nr.3 using a standard Nr.11 surgical blade. But I suspect that many other brands will fit as well, or else the overall size can be changed while slicing. The Rhino 6 source file (.3dm) is also included for you to customize the part further.
Please share your prints!
Simple demonstration: https://youtu.be/1fdqnsbiUSE
Manufacturing Advice
The parts are made to be printed without the need for support material or post processing. Preferably, use a semi-flexible plastic like PET-G or ABS if possible, and a nozzle size not larger than 0.6mm.
The hinge consists of a M3 nut and bolt (10mm thread length). Use loctite/super glue on the nut at final assembly and torque the bolt enough to remove slack but not so much as to bind up the sliding mechanism.