Nr.3 Scalpel Case with Spare Blade Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A storage case for Scalpel knifes that holds spare blades.
- Rating
- 4.667 / 5
- Likes
- 52
- Downloads
- 169
- Makes
- 4
- Views
- 918
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is yet another storage case for a Scalpel knife, but this one incorporates a compartment for storing up to three spare blades and has a sliding door mechanism. The case is make specifically for my Gima branded Scalpel handle Nr.3 using a standard Nr.11 surgical blade. But I suspect that many other brands will fit as well, or else the overall size can be changed while slicing. The Rhino 6 source file (.3dm) is also included for you to customize the part further.
Please share your prints!
Simple demonstration: https://youtu.be/1fdqnsbiUSE
Manufacturing Advice
The parts are made to be printed without the need for support material or post processing. Preferably, use a semi-flexible plastic like PET-G or ABS if possible, and a nozzle size not larger than 0.6mm.
The hinge consists of a M3 nut and bolt (10mm thread length). Use loctite/super glue on the nut at final assembly and torque the bolt enough to remove slack but not so much as to bind up the sliding mechanism.