1 / 4
Radiator ventilator clip magnetic for 80mm fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radiator ventilator clip magnetic for 80mm fans. Save money!
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 1964
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (69)Powiązane
Save money, save the environment.
With these simpel fan clips, I made my radiator fan from ten 80 mm fans connected in series with y-splitters (edge thickness of fan for clip is 4 mm). The fans are controlled by a temperature switch and a simple LED dimmer connected to a DC12V adapter (2A). In the clips exactly fit two magnets of 10mm diameter and 2mm thick. No glue needed.
Required per fan:
- 2x clip
- 2x magnet 10x2mm
Printing in .28 resolution is sufficient. No supports needed.
Use ABS or other filament that is heat resistant.
