1 / 4
6 x 4 Macro pad with Number keys for RPi Pico
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 6 by 4 key macro pad using a Raspberry Pi Pico running KMK.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 1604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (27)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (77)Powiązane
Instructions
I go more in depth into how to build it yourself in my blog post: https://sanderg.nl/en/posts/3d-printed-hand-wired-macro-pad-with-raspberry-pi-pico-kmk-&-circuitpython/
Bill of Materials
- 24x Cherry MX switches (I got the Blacks purely because my local electronics store had them in stock) - €1.45 x 24 = €34.80
- 24x Rectifier Diodes (Doesn’t matter which one, I used the 1N4004) - €5.00 for 100
- Raspberry Pi Pico - €8.95 (or €44.95 for 10)
- Mounting cord - 0.4mm² / 21AWG - €2.60 for 5m (I took red and black for distinction)
- 4x M3 Threaded Inserts - €12.80 for 100, €28.90 for set of 200 M3, M4 and M5’s in total
- 4x M3 screws - €3.29 for a set of 30 including nuts
- 4x Protective pads - €2,19 for 9
- Soldering tin - €13.45 for 100g
- Printed parts
Tools
- 3D printer
- Soldering iron
- Cable stripper
- Multimeter (optional if you are a solder god who never makes a mistake. So get 2.)