Welding Helmet Suspension Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Welding helmet suspension adapter for the standard Jackson/Hunter helmet suspension to a simple helmet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a welding helmet suspension adapter to allow for the standard Jackson/Hunter helmet suspension rig to adapt to a simple welding helmet that just has holes on the side.
Modern Jackson/Hunter helmets have a block of plastic on the sides that provide a detent for the basic suspension system, but older helmets just have a flat surface with holes. This adapter provides a raised cylinder with a detent that also holds the square-shaft of the attachment bolt. There are 2 parts, a RH and a LH side, they are just mirrors of each other.
To attach it to the helmet, I used a 3mm x 10mm machine screw and drilled a hole through the adapter where one of the existing holes was in the helmet. I used a nylock nut on the backside to prevent it from falling out.
I printed this in black ABS, but PLA would work fine if it is stored in a cool area. I wanted this to last for a while. Standard settings (0.15mm layers) with 20% infill on an Anycubic Vyper.
Please feel free to remix, share, or modify this model as you wish. Enjoy!