Welding Helmet Suspension Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Welding helmet suspension adapter for the standard Jackson/Hunter helmet suspension to a simple helmet.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a welding helmet suspension adapter to allow for the standard Jackson/Hunter helmet suspension rig to adapt to a simple welding helmet that just has holes on the side.
Modern Jackson/Hunter helmets have a block of plastic on the sides that provide a detent for the basic suspension system, but older helmets just have a flat surface with holes. This adapter provides a raised cylinder with a detent that also holds the square-shaft of the attachment bolt. There are 2 parts, a RH and a LH side, they are just mirrors of each other.
To attach it to the helmet, I used a 3mm x 10mm machine screw and drilled a hole through the adapter where one of the existing holes was in the helmet. I used a nylock nut on the backside to prevent it from falling out.
I printed this in black ABS, but PLA would work fine if it is stored in a cool area. I wanted this to last for a while. Standard settings (0.15mm layers) with 20% infill on an Anycubic Vyper.
Please feel free to remix, share, or modify this model as you wish. Enjoy!