Dropper Bottle Paint (Vallejo, Army Painter, etc.) Holder for Pegboard, Seven Single Line
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for 7 dropper paint bottles, such as used by Vallejo, The Army Painter, and similar, in a standard peg board.
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 311
- Wydruki
- 0
- Wyświetlenia
- 2233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple holder for dropper paint bottles, such as used by Vallejo, The Army Painter, and similar. The earlier design I made was for five, but there was some extra space so I replaced the ends with these seven bottle holders. It is secured to a standard pegboard that can accept 6mm pegs.
This is remixed from an earlier design on Thingiverse by bloodstrike so as to raise up the height of the holder walls, and was in turn remixed from ShadyRabbit's original (also on Thingiverse) design for Citadel Color bottles.
Make sure to print it with supports!