Garmin Varia Post Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Garmin Varia for a straight up and down post.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 1493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This should be printed in something heat resistant, its in the sun and can get pretty hot. I used ABS.
Yes, yet another mount. My rear rack has a faux seat post to mount things, but the included elastic mount would bounce enough to slip off eventually. Or break rubbing on one of the nibs meant to stop things from sliding off.
This takes the original ¼ turn internal mount from the one included. You unscrew it (two screws) and put it on this one. As designed, you will need slightly longer screws.
The CAD files are included, and quite a few things are user parameters in the F3D file so you can tweak/adapt. Have fun!