1 / 3
UPDATED 12mm x 4-Stacked with Ladder Locks, 0.3mm Layer Height — zdjęcie 1
1 / 3

UPDATED 12mm x 4-Stacked with Ladder Locks, 0.3mm Layer Height

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This version is updated.

Ocena
5 / 5
Polubienia
2
Pobrania
154
Wydruki
0
Wyświetlenia
990
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This version is updated. Please use this instead: https://www.prusaprinters.org/prints/27855-updated-12mm-x-8-shields-with-ladder-locks-for-8mm

Print instructions

This is for PETG. All print settings are included in the 3mf file. You need 8mm elastic fabric (thicker ones will not fit). Check the photo for a sure way to loop the fabric around the ladder lock. It does not require a hole in the fabric, and is easily adjustable.