1 / 3
UPDATED 12mm x 4-Stacked with Ladder Locks, 0.3mm Layer Height
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This version is updated.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 154
- Makes
- 0
- Views
- 991
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
This version is updated. Please use this instead: https://www.prusaprinters.org/prints/27855-updated-12mm-x-8-shields-with-ladder-locks-for-8mm
Print instructions
This is for PETG. All print settings are included in the 3mf file. You need 8mm elastic fabric (thicker ones will not fit). Check the photo for a sure way to loop the fabric around the ladder lock. It does not require a hole in the fabric, and is easily adjustable.