1 / 2
Scouting Sash Pin (Sea Scout, Venturing and Scouts BSA)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pin to hold an OA sash to the shoulder on a sea scout uniform.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 986
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
This is a pin like the one sold by National Supply, but more subdued and in line to the Sea Scout uniform. I made it with no backing recess, so you can add magnets or pin backs as you choose.
There are 2 pins, wide (130 mm) and Narrow (104 mm) and a Sea Scout logo to combine as you choose. The old Sea Scout hat pin, that is about 25mm also could be glued on if you want fine detail.
I used concentric ironing in Cura in the examples to smooth the top a bit. The examples are printed in Inland PLA+ Black and Grey.