1 / 2
Scouting Sash Pin (Sea Scout, Venturing and Scouts BSA)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pin to hold an OA sash to the shoulder on a sea scout uniform.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 986
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
This is a pin like the one sold by National Supply, but more subdued and in line to the Sea Scout uniform. I made it with no backing recess, so you can add magnets or pin backs as you choose.
There are 2 pins, wide (130 mm) and Narrow (104 mm) and a Sea Scout logo to combine as you choose. The old Sea Scout hat pin, that is about 25mm also could be glued on if you want fine detail.
I used concentric ironing in Cura in the examples to smooth the top a bit. The examples are printed in Inland PLA+ Black and Grey.