Small pliers hanger for Ikea Skadis (for painted boards)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanger for a set of Powerfix small pliers for Ikea Skadis pegboard. Included holes for a set of short hex wrenches.
- Ocena
- 4,667 / 5
- Polubienia
- 199
- Pobrania
- 791
- Wydruki
- 17
- Wyświetlenia
- 2534
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ncluded a version without hex holes, if you want to add your own set, or don't need it at all. Hex holes are for 2, 2,5, 3, 4, 5, 6 mm
I printed it on vanilla white Prusament PLA, with 0.15 layer height and 0.4 nozzle. Snug supports from build plate only. Hex holes do not need support!
Originak base wasa bit tight on the wall. - For painted boards, I made a second version. The hooks are 5% smaller, and fits for 0.3mm thicker wall, than the original.
Original for white boards (really snug fit): Link