E-Scooter Child Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed these to allow my son to have handles to hold onto instead of hanging on to the neck. Designed for a 53mm…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Designed these to allow my son to have handles to hold onto instead of hanging on to the neck.
Designed for a 53mm neck, it simply clamps around it with 4 M4x25 cap-screws and dome nuts (I only had M4x30 - hence the extra nut in the pics) and the 30mm handles just push over the prongs. The handles have a 1:1 sizing and requires a lot of force to fit (so no worries of it coming off by itself!).
Printer settings:
1.75mm PLA
0.2mm Layer Height
4 Walls (Top, bottom and sides)
10% infill
220°C and the bed at 60°C
80mm/s print speed with 75% cooling
Tree Supports @>75°
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10
Filament: 3RDAX PLA Black Post-Printing =============
Just trimmed the edges and removed some light stringing and then gave it a once over with a drywall sanding block.
Category: DIY