E-Scooter Child Handles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed these to allow my son to have handles to hold onto instead of hanging on to the neck. Designed for a 53mm…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 112
- Makes
- 0
- Views
- 652
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Designed these to allow my son to have handles to hold onto instead of hanging on to the neck.
Designed for a 53mm neck, it simply clamps around it with 4 M4x25 cap-screws and dome nuts (I only had M4x30 - hence the extra nut in the pics) and the 30mm handles just push over the prongs. The handles have a 1:1 sizing and requires a lot of force to fit (so no worries of it coming off by itself!).
Printer settings:
1.75mm PLA
0.2mm Layer Height
4 Walls (Top, bottom and sides)
10% infill
220°C and the bed at 60°C
80mm/s print speed with 75% cooling
Tree Supports @>75°
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
10
Filament: 3RDAX PLA Black Post-Printing =============
Just trimmed the edges and removed some light stringing and then gave it a once over with a drywall sanding block.
Category: DIY