Apple TV Remote Flat Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very basic case with a flat bottom for the Apple TV Siri remote so that it won't wobble on flat surfaces.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 364
- Wydruki
- 5
- Wyświetlenia
- 1348
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is for the current Apple TV Siri Remote (for TV 4K 2nd Gen). Older versions might fit the same, but I haven't tested this.
I was very annoyed when trying to use the remote on a flat table top. Due to the curved underside it wobbles a lot.
This case lays the remote flat on any surface. Openings for the IR emitter, the Siri button and the Lightning port are provided.
The placement is intended to be friction fit. If the tolerances are too tight, try adjusting XY compensation settings in your slicer. If tolerances are too loose you can use a small strip of thin double sided tape.