Screwdrivers holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for 8 screwdrivers witch maximum 20mm handle. Not very beautiful but functional.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 404
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This screwdrivers holder has 3 hole for screw it on the wall, on the table or wherever you want.
The holes are designed for standard or 3mm wood screws with countersunk heads.
I modeled this piece for purely functional purposes so it's not very nice but it does the job ;)
UPDATE 1
The V2 is the new version with the compartments for the screwdrivers more guided to keep them from moving and for greater robustness.
There are 3 types: fixing holes on the base, holes on the side and without holes in case you want to use double-sided tape or any other fixing method.
The diameter of the holes is for M3 countersunk screws with a maximum head diameter of 6,8mm.
The V2 is designed to be printed standing up without supports.
UPDATE 2
21/07/2026: Updated models with enlarged holes for easier screw clearance.
UPDATE 3
05/10/2026: Uploaded a 4-screwdriver holder for those who have a small 3D printer (like the Prusa Mini or Bambu Lab A1 mini) or simply don't need an 8-screwdriver version.
Enjoy it!