Stick-on kickstand for Steam Deck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kickstand designed to be stuck on using strong double sided tape to the back of the Steam Deck.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 917
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Kickstand designed to be stuck to the back of the Steam Deck using strong double-sided tape (acrylic foam type tapes recommended).
Offers 3 angles:
- nearly vertical
- ~25°
- ~50°
When installed the case included with Steam Deck will still zip-up but is suboptimal as the folded kickstand is 9.4mm thick so keep that it mind.
Assembly:
- install the brace in to the lid by inserting it rotated, perpendicularly to the lid so one of the hinge protrusions matches one of the notches
- rotate until both protrusions match up with notches.
- repeat for lid and base
Installation:
- Using double-sided tape stick the kickstand centrally about 1mm under VALVE logo
Note: Do this before installing the base on the Deck as the slight flexibility of the base is required to fit the parts together
Note 2: assembly will require a bit of force, this is by design.
Does not require supports, just flip the lid so logo faces the table.