Stick-on kickstand for Steam Deck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kickstand designed to be stuck on using strong double sided tape to the back of the Steam Deck.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 66
- Makes
- 2
- Views
- 917
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Kickstand designed to be stuck to the back of the Steam Deck using strong double-sided tape (acrylic foam type tapes recommended).
Offers 3 angles:
- nearly vertical
- ~25°
- ~50°
When installed the case included with Steam Deck will still zip-up but is suboptimal as the folded kickstand is 9.4mm thick so keep that it mind.
Assembly:
- install the brace in to the lid by inserting it rotated, perpendicularly to the lid so one of the hinge protrusions matches one of the notches
- rotate until both protrusions match up with notches.
- repeat for lid and base
Installation:
- Using double-sided tape stick the kickstand centrally about 1mm under VALVE logo
Note: Do this before installing the base on the Deck as the slight flexibility of the base is required to fit the parts together
Note 2: assembly will require a bit of force, this is by design.
Does not require supports, just flip the lid so logo faces the table.