1 / 12
Panel ATO-ATC 2 to 10 Blade Fuse Holders Mount Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had to mount 3 fuse holders for a project, I found it difficult to cut and drill the precise rectangular holes with…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to mount 3 fuse holders for a project, I found it difficult to cut and drill the precise rectangular holes with the small screw holes right beside each other. During the cutting of my first rectangular hole my panel cracked. The solution was simple, cut one large rectangular hole for all three fuse holders and use a 3D printed plate to mount them too.
Here is a link to the fuse holder that will fit this mount plate:
Category: Electronics