Compact rotating platform project- 14cm wide x 2.5cm tall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ready to get things spinning? Just add 1x AA battery, 2x mr128 bearings ($1 each) and a basic DC motor. Switch optional!
- Ocena
- 5 / 5
- Polubienia
- 281
- Pobrania
- 536
- Wydruki
- 2
- Wyświetlenia
- 4137
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer.
Wrap the wires around the built-in battery holder then pop in your favorite AA.
Print the gear and put it on flat-side facing the motor. (it's got a little taper to it)
Press the 2 MR128's on and that's it.
Want to get fancy? Add a potentiometer motor controller for $2 or resistors for pennies to customize your power level. (I left a nice spot for it)
4k Video Clip Here: https://www.youtube.com/shorts/K8S1M81W_RY
If you noticed a wobble that's because I had Sanji way off center of gravity. The balance is actually pretty good. Good eye.