Box for Sunton esp32-3248S035 board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple box with sliding lid, for the esp32 board with 3.5 TFT.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 346
- Wydruki
- 2
- Wyświetlenia
- 2890
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have got this amazing and cheap (<20€) board sporting an esp32, 3.5 TFT, multicolor LED, SD-card reader and many connectors for audio, sensors...
But it is a development board, and unfortunately a nice enclosure was not available.
As I plan to use it for home automation (with Home Assistant and openHASP), I need a nice box I can put on a shelf or hang on a wall.
I designed this box with a sliding lid at the back you can customize to add some hangs, holes, or whatever you need for your installation.
I have printed it in common PLA (Artillery Genius with 0.4 nozzle), using low quality (0.28mm) Cura profile.
No supports required.