IKEA Skadis simple key hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple and effective key (or other hangable stuff) hook for your IKEA Skadis pegboard
- Ocena
- 4,941 / 5
- Polubienia
- 564
- Pobrania
- 2737
- Wydruki
- 61
- Wyświetlenia
- 6782
- Oceny
- 51
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A very simple key (or other hangable stuff) hook for IKEA Skadis pegboard.
I wanted a simple hook for Skadis that fills the board hole instead of hanging from it.
I came up with a solution as easy and quick as possible to print and install (or remove).
You can download the hooks in two lenghts, 20 (shown in photos) or 12 mm, and with two slightly different dimensions for a tighter or a looser fit. Print a test one to check your best fitting before printing billions!
If the loose version is too loose and tight one is too tight try to scale the loose version's height to 5 mm directly in your slicer. It should do the trick.
The hooks print quickly without support.