IKEA Skadis custom wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom mounting solution for IKEA Skadis pegboard
- Ocena
- 0 / 5
- Polubienia
- 81
- Pobrania
- 385
- Wydruki
- 1
- Wyświetlenia
- 2751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A custom mounting solution to mount a Skadis pegboard on the wall if, for some reason, you cannot use the original mounting metal bracket.
The distance between the board and the wall is the same as the original.
I designed this mounts to hang a custom dimension Skadis board for which I had obviously no original mounting bracket/screws.
And because I'm a bit of a maniac about details, I wanted the visible screw head to be centered with the board hole and the whole mount to be as compact as possible.
It prints without support.
To install you need, for each mount:
- Bolt M4 x 25 mm + Nut M4
- M3 wall plug and screw
Insert the nut in the hex cave before screwing the mount to the wall through the slotted hole. Then secure the pegboard with the M4 bolt.
The slotted hole for the wall screw allows some adjustments, but the holes in the wall should be most precise as possible.
