1:8 scale 1:10 scale pintle and pintle ball combo trailer hitch for 3d sets or universal, Rancher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
pintle and pintle ball trailer hitch for models and RC cars
- Ocena
- 5 / 5
- Polubienia
- 229
- Pobrania
- 1092
- Wydruki
- 9
- Wyświetlenia
- 6191
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
You have option!! Four option on the pintle hitch alone
Pintle hitch. Connects with 3mm eye bolt. Works better and cost less. https://amzn.to/3W2ogoN (US Amazon Affiliate link)
Strongest Pintle- Uses a 3mm Eye Bolt cut to to allow the trailer eye bolt in.
Improved Pintle Ball hitch. Along with the original pintle only hitch we have two options for Pintle ball combo. One has a plastic ball and works well. The second uses a standard 6mm ball.
The Pintle hitch locks closed securing the pintle ring in place. This design uses a cam system. Flip the lower section down and the upper will open. Close the upper and flip the lower back up and it is locked closed.
Pintle Ball combo works as a ball hitch when open and a pintle when locked closed.
Printer Settings:
nozzle 0.4
infill 90%
STL files have a Prefix letter. All parts for each set are marked with the same prefix letter.
Example: If you wanted the Original pintle hitch you need all STL files that begin with an B
A- Strongest pintle uses a 3mm Eye bolt cut open
B- Original pintle hitch - (long or short option)
C- Pintle and standard ball hitch (long or short option)
D- Pintle and standard ball hitch using metal standard ball (long or short option)
E- Rancher Toe bar
P-Off Road Camper “Rock Hoper” ball hitch
Q- Pintle Hitch for Off Road Camper “Rock Hoper”
R- Car Trailer Ball hitch
S- Pintle Hitch for Car Trailer
T- Morrigan Non Rear Steer Trailer hitch (attaches to axle)
U- Morrigan Rear Steer Trailer hitch (attaches to axle)
Parts List:
A- Receiver - 3x- M2 x 8mm
B- Receiver - 2x- M2 x 8mm , 1x- M2 x 10mm, M2 nut
C- Receiver - 2x- M2 x 8mm, 6mm ball ( M3 Nylock nut if long ball thread is available)
D- Rancher Toe Bar adapter - 2x- M3 x 10mm, 8x- M2 x 8mm
P- Ball Hitch - 1x- M2 x 14mm, 2x- M2 nuts, Thread Locker
Q- Pintle Hitch - M3 eye bolt
R- Ball Hitch - 1x- M2 x 16mm, 2x- M2 nuts, Thread Locker
S- Pintle Hitch - M3 eye bolt
T- Morrigan Receiver - M3 eye bolt, 10x- M2 x 12mm, 2x- M2 x 10mm
U- Morrigan Rear Steer Receiver - M3 eye bolt, 2x- M2 16mm 8x- M2 x 12mm, 2x- M2 x 10mm, 2x- M2 x 8mm
Leave a Like, It helps