Spool for Aqara Roller Shade Driver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the use of string blinds (e.g. Roman blinds) with the Aqara Roller Shade Driver.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 1587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This spool is compatible with the Aqara blind driver and should provide a fairly snug fit onto the motor output shaft. The driver appears to provide enough torque to raise roman blinds.
Will work with a pull string up to about 1m long.
- Loop the string through side of the spool and use the holes provided to push it through to the ‘front’ (the side with the channels). Something like a thin screwdriver would be helpful.
- Route the string through the channels
- Pass the end of the string back through the hole provided on the opposite side so that it finishes on the inside of the spool again.
I printed mine in white PLA with 0.1mm layers, 8 walls, 4 top and bottom layers and 20% infill. Should print very easily on its back with the channels facing upwards, as the overhang is only approx 45 degrees.
Edit 18/10/22: Added Spool_Alt.stl with a slightly larger diameter hole for the motor shaft