Steam Deck External NVMe 2280 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for an external NVMe 2280 that I added to my Steam Deck using a modded NVMe extension cable.
- Ocena
- 4,667 / 5
- Polubienia
- 82
- Pobrania
- 530
- Wydruki
- 2
- Wyświetlenia
- 14 723
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a work in progress and you're welcome to remix it as you wish. If you are using a FDM printer, I would suggest printing it vertically so the curve prints nicer and you don't have to use supports.
I added a revised model name ending v3-2. The bulge is shorter, the NVMe area is a little taller and the overall width is a little larger. The picture of the cover in clear smoke is the updated model. It was printed with Siraya Tech Fast ABS-Like (80%) and Tenacious (20%). To attach it, I used a double-sided tape used for cellphone screens that is 1.5mm wide. It is very strong.