Steam Deck External NVMe 2280 Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a cover for an external NVMe 2280 that I added to my Steam Deck using a modded NVMe extension cable.
- Rating
- 4.667 / 5
- Likes
- 82
- Downloads
- 530
- Makes
- 2
- Views
- 14,738
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is a work in progress and you're welcome to remix it as you wish. If you are using a FDM printer, I would suggest printing it vertically so the curve prints nicer and you don't have to use supports.
I added a revised model name ending v3-2. The bulge is shorter, the NVMe area is a little taller and the overall width is a little larger. The picture of the cover in clear smoke is the updated model. It was printed with Siraya Tech Fast ABS-Like (80%) and Tenacious (20%). To attach it, I used a double-sided tape used for cellphone screens that is 1.5mm wide. It is very strong.