1 / 11
Staff Of Sliske - RuneScape — zdjęcie 1
1 / 11

Staff Of Sliske - RuneScape

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the Staff of Sliske from RuneScape. I've designed this to be printable as a cosplay item, scaled to 60 inches…

Ocena
0 / 5
Polubienia
5
Pobrania
30
Wydruki
0
Wyświetlenia
396
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This is the Staff of Sliske from RuneScape. I've designed this to be printable as a cosplay item, scaled to 60 inches total length (5 feet). The model has been sliced into 5 total pieces with interlocking connections on each end.

EDIT: Moved the connections to the other end of the parts. This makes them printable in their current orientation; no rotating necessary. It also solves a clearance issue where one part had protruding connectors on each end and could not fit into a 450mm high build volume.. it fits now. ALSO, I will be attempting to print this soon, so please check back in when it's done for final files / print information.

Final Edit: This model has been printed! Pictures have been added above.

In order to print this model you will need:

  • A printer larger than an Ender 3, or a program to slice the model.
  • Approximately 2.5 - 3 rolls of filament, depending on settings.
  • Hot glue or Epoxy to assemble the parts. In my testing, hot glue was more than enough to weld PLA together.

Fair warning: If you attempt to scale this model it WILL alter the fit of the parts and the tolerances may be too tight or loose to fit properly. I've given the connections a gap of 0.6mm between the walls of each part to allow them to fit together easily and leave just a bit of space for glue. Scaling the model will make this gap smaller or larger, depending on which way you go.

Print Settings

Rafts:

No

Supports:

Yes

Infill:

Varies by part

Filament:

Any PLA

Any (grey recommended)


Notes:

This model has been printed and fits together as expected.

Category: 3D Printing

Tagi